Skip to end of metadata
Go to start of metadata

Via Selenium Testing

Identity Tests

Create Documents Tests

SMK1 Test Name: Create Person Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Person link in the Identity Channel under the Identity heading
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Person document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK2 Test Name: Create Group Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Group link in the Identity Channel under the Identity heading
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Group document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK3 Test Name: Create Role Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Role link in the Identity Channel under the Identity heading
  4. Click on the Create New button in the upper right
  5. Click Search
  6. Click return value link on first row in results set
  7. Click the Cancel Button
  8. Click the Yes button on the confirmation screen

Expected Result: The create Role document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK4 Test Name: Create Permission Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Permission link in the Identity Channel under the Identity heading
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Permission document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK5 Test Name: Create Responsibility Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Responsibility link in the Identity Channel under the Identity heading
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Respoinsibility document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK6 Test Name: Create Campus Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Campus link in the Identity Channel under the Locations heading
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Campus document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK7 Test Name: Create Country Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Country link in the Identity Channel under the Locations heading
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Country document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK8 Test Name: Create County Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the County link in the Identity Channel under the Locations heading
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create County document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK9 Test Name: Create Postal Code Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Postal Code link in the Identity Channel under the Locations heading
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Postal Code document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK10 Test Name: Create State Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the State link in the Identity Channel under the Locations heading
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create State document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

Maintenance Documents Tests

SMK11 Test Name: Edit Group Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Group link in the Identity Channel under the Identity heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Group maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK12 Test Name: Edit Person Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Person link in the Identity Channel under the Identity heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Person maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK13 Test Name: Edit Role Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Role link in the Identity Channel under the Identity heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Role maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK14 Test Name: Edit Permission Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Permission link in the Identity Channel under the Identity heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Permission maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK15 Test Name: Edit Campus Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Campus link in the Identity Channel under the Locations heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Campus maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK16 Test Name: Edit Country Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Country link in the Identity Channel under the Locations heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Country maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK17 Test Name: Edit State Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the State link in the Identity Channel under the Locations heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The State maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK18 Test Name: Edit Campus Type Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Campus Type link in the Identity Channel under the Reference heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Campus Type maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

Configuration Tests

Create Documents Tests

SMK19 Test Name: Create Parameter Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Parameter link in the Configuration channel
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Parameter document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK20 Test Name: Create Parameter Type Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Parameter Type link in the Configuration channel
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Parameter Type document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK21 Test Name: Create Namespace Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Namespace link in the Configuration channel
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Namespace document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

Maintenance Documents Tests

SMK22 Test Name: Edit Parameter Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Parameter link in the Configuration channel
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Parameter maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK23 Test Name: Edit Parameter Type Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Parameter Type link in the Configuration channel
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Parameter Type maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK24 Test Name: Edit Namespace Type Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Namespace link in the Configuration channel
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Namespace maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

Workflow Tests

Create Documents Tests

SMK25 Test Name: Create Document Type Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Document Type link in the Workflow channel
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Document Type document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

Maintenance Documents Tests

SMK26 Test Name: Edit Document Type Screen

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Document Type link in the Workflow channel
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Document Type maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

Main Menu Tests

Create Documents Tests

SMK27 Test Name: Create Routing Rules Screen

  1. Login in as Admin
  2. Click on the Main Menu tab at the top
  3. Click the Routing Rules link in the Workflow channel
  4. Click on the Create New button in the upper right
  5. Click the Cancel Button
  6. Click the Yes button on the confirmation screen

Expected Result: The create Routing Rules document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK28 Test Name: Create Routing Rules Delegation Screen

  1. Login in as Admin
  2. Click on the Main Menu tab at the top
  3. Click the Routing Rules Delegation link in the Workflow channel
  4. Click on the Create New button in the upper right
  5. Click the "Select parent rule" quickfinder lookup
  6. Click Search
  7. return a result having the "TravelRequest-DestinationRouting" Rule Template
  8. Click the radio button to select the first item in "Select Parent Responsibility to Delegate From"
  9. Click the "Continue" button
  10. Click the Cancel Button
  11. Click the Yes button on the confirmation screen

Expected Result: The create Routing Rules Delegation document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

Maintenance Documents Tests

SMK29 Test Name: Edit Routing Rules Screen

  1. Login in as Admin
  2. Click on the Main Menu tab at the top
  3. Click the Routing Rules link in the Workflow channel
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Routing Rules maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK30 Test Name: Edit Routing Rules Delegation Screen

  1. Login in as Admin
  2. Click on the Main Menu tab at the top
  3. Click the Routing Rules Delegation link in the Workflow channel
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button
  7. Click the Yes button on the confirmation screen

Expected Result: The Routing Rules Delegation maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

More Complex Tests

Create Documents & Blanket Approve Tests

SMK31 Test Name: Create Group

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Group link in the Identity channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Enter “Validation Test Group” in the Description field located in the Document Overview section
  7. Select “Kuali Systems” from the Group Namespace dropdown located in the Overview section
  8. Enter “Validation Test Group” in the Group Name Field located in the Overview section
  9. Click the lookup/search icon next to the Member Identifier field located in the Add Memeber subsection of the Assignees section
  10. Click the search button on the Person Lookup page
  11. Click the return value link next to the first row in the results set
  12. Click the add button next to the row in the Add Memeber subsection of the Assignees section
  13. Click the blanket approve button located at the bottom of the screen
  14. Click the Doc Search button in the upper left
  15. Click the Serarch button
  16. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Group document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK32 Test Name: Create Role

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Role link in the Identity channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Click the search button
  7. Click the return value link next to the first row in the resutls set
  8. Enter “Validation Test Role” in the Description field located in the Document Overview section
  9. Select “Kuali Systems” from the Namespace dropdown located in the Overview section
  10. Enter “Validation Test Role” in the Role Name Field located in the Overview section
  11. Click the lookup/search icon next to the Member Identifier field located in the Add Memeber subsection of the Assignees section
  12. Click the search button on the Person Lookup page
  13. Click the return value link next to the first row in the results set
  14. Click the add button next to the row in the Add Memeber subsection of the Assignees section
  15. Click the blanket approve button located at the bottom of the screen
  16. Click the Doc Search button in the upper left
  17. Click the Serarch button
  18. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Role document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK33 Test Name: Create Permission

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Permission link in the Identity channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right owner of the document
  6. Enter “Validation Test Permission” in the Description field located in the Document Overview section
  7. Enter “3333” in the Template Id field in the New subsection of the Permission Info section
  8. Select “Kuali Systems” from the Permission Namespace drop down located in the New subsection of the Permission Info section
  9. Enter “Validation Test Permission” in the Permission Name Field located in the Overview section
  10. Click the blanket approve button located at the bottom of the screen
  11. Click the Doc Search button in the upper left
  12. Click the Serarch button
  13. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Permission document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK34 Test Name: Create Responsibility

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Responsibility link in the Identity channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Enter “Validation Test Responsibility” in the Description field located in the Document Overview section
  7. Select “Kuali Systems” from the Responsibility Namespace drop down located in the New subsection of the Responsibility Info section
  8. Enter “Validation Test Role” in the Responsibility Name Field located in the New subsection of the Responsibility Info section
  9. Enter “Test” in the Document Type Name field located in the New subsection of the Responsibility Details section
  10. Enter “Test” in the Route Node Name field located in the New subsection of the Responsibility Details section
  11. Check the box titled “Action Details At Role Member Level” located in the New subsection of the Responsibility Details section
  12. Check the box titled “Required” located in the New subsection of the Responsibility Details section
  13. Click the blanket approve button located at the bottom of the screen
  14. Click the Doc Search button in the upper left
  15. Click the Serarch button
  16. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Role document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK35 Test Name: Create Person

  1.  

Expected Result: The create Person document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK36 Test Name: Create Campus

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Campus link in the Identity channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Enter “Validation Test Campus” in the Description field located in the Document Overview section
  7. Enter “MS” in the Campus Code field located in the Edit Campus section in the New subsection
  8. Enter “Validation Test Campus” in the Campus Name Field located in the Edit Campus section in the New subsection
  9. Enter “VTestCamp” in the Campus Short Name Field located in the Edit Campus section in the New subsection
  10. Select "B-Both" from the Campus Type Code drop down located in the Edit Campus section in the New subsection
  11. Click the blanket approve button located at the bottom of the screen
  12. Click the Doc Search button in the upper left
  13. Click the Serarch button
  14. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Campus document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK37 Test Name: Create Country

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Country link in the Identity channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Enter “Validation Test Country” in the Description field located in the Document Overview section
  7. Enter “DS” in the Country Code field located in the Edit Country section in the New subsection
  8. Enter “Validation Test Country” in the Country Name field located in the Edit Country section in the New subsection
  9. Click the blanket approve button located at the bottom of the screen
  10. Click the Doc Search button in the upper left
  11. Click the Serarch button
  12. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Country document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK38 Test Name: Create County

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the County link in the Identity channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Enter “Validation Test County” in the Description field located in the Document Overview section
  7. Click the lookup icon next to the Country Code field located in the Edit Counties section in the New subsection
  8. Enter "US" in the Country Code field on the Country Lookup page
  9. Click the search button on the Country Lookup page
  10. Click the return value link on the first row of the results set
  11. Enter "DS" in the County Code field located in the Edit Counties section in the New subsection
  12. Click the lookup icon next to the State Code field located in the Edit Counties section in the New subsection
  13. Enter "IN" in the State Abbreviation field on the State Code Lookup page
  14. Click the search button on the State Code Lookup page
  15. Click the return value link on the first row of the results set
  16. Enter "Validation Test County" in the County Name filed located in the Edit Counties section in the New subsection
  17. Check the Active Indicator box to yes/true located in the Edit Counties section in the New subsection
  18. Click the blanket approve button located at the bottom of the screen
  19. Click the Doc Search button in the upper left
  20. Click the Serarch button
  21. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create County document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK39 Test Name: Postal Code

  1.  

Expected Result: The create Postal Code document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK40 Test Name: Create State

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the State link in the Identity channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Enter “Validation Test State” in the Description field located in the Document Overview section
  7. Click the lookup icon next to the Country Code field located in the Edit States section in the New subsection
  8. Click the search button on the Country Lookup page
  9. Click the return value link on the first row of the results set
  10. Enter "TS" in the State Abbreviation field located in the Edit States section in the New subsection
  11. Enter "Validation Test State" in the State Name field located in the Edit States section in the New subsection
  12. Check the Active Indicator box to yes/true located in the Edit States section in the New subsection
  13. Click the blanket approve button located at the bottom of the screen
  14. Click the Doc Search button in the upper left
  15. Click the Search button
  16. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create State document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK41 Test Name: Create Campus Type

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Campus Type link in the Identity channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Enter “Validation Test Campus Type” in the Description field located in the Document Overview section
  7. Enter "I" in the Campus Type Code field located in the Edit Campus Type section in the New subsection
  8. Enter "Indianapolis" in the Campus Type Name field located in the Edit Campus Type section in the New subsection
  9. Click the blanket approve button located at the bottom of the screen
  10. Click the Doc Search button in the upper left
  11. Click the Search button
  12. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Campus Type document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK42 Test Name: Create Document Type

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Document Type link in the Configuration channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Click the lookup icon next to the Parent Name field located in the Edit Document Type section in the New subsection
  7. Click the search button on the Document Type Lookup page
  8. Click the return value link on the first row of the results set
  9. Enter “Validation Test Doc Type” in the Description field located in the Document Overview section
  10. Enter "Validation Test Doc Type" in the Name field located in the Edit Document Type section in the New subsection
  11. Check the Active Indicator box to yes/true located in the Edit Document Type section in the New subsection
  12. Click the blanket approve button located at the bottom of the screen
  13. Click the Doc Search button in the upper left
  14. Click the Search button
  15. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Document Type document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK43 Test Name: Create Parameter

  1.  

Expected Result: The create Parameter document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK44 Test Name: Create Namespace

  1. Login in as Admin
  2. Click on the Administration tab at the top
  3. Click the Namespace link in the Configuration channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Enter “Validation Test Namespace” in the Description field located in the Document Overview section
  7. Enter "VTN" in the Namespace Code field located in the Edit Namespace section in the New subsection
  8. Enter "Validation Test NameSpace" in the Namespace Name field located in the Edit Namespace section in the New subsection
  9. Enter "RICE" in the Application ID field located in the Edit Namespace section in the New subsection
  10. Check the Active Indicator box to yes/true located in the Edit Namespace section in the New subsection
  11. Click the blanket approve button located at the bottom of the screen
  12. Click the Doc Search button in the upper left
  13. Click the Search button
  14. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Namespace document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK45 Test Name: Create Routing Rules

  1. Login in as Admin
  2. Click on the Main Menu tab at the top
  3. Click the Routing Rule link in the Workflow channel
  4. Click on the Create New button in the upper right
  5. Store the docID displayed in the upper right corner of the document
  6. Click the lookup icon next to the Document Type field located in the Create New Rule section in the Create New Rule subsection
  7. Enter "RoutingRuleDocument" in the Name field of the lookup
  8. Click the search button on the Document Type Lookup page
  9. Click the return value link on the first row of the results set
  10. Click the lookup icon next to the Rule Template field located in the Create New Rule section in the Create New Rule subsection
  11. Enter "RuleRoutingTemplate" in the Name field of the lookup
  12. Click the search button on the Rule Template Lookup page
  13. Click the return value link on the first row of the results set
  14. Click the Continue button
  15. Enter "Test Routing Rule" in the Description filed located in the Document Overview section in the Document Overview subsection
  16. Enter "Test Routing Rule" in the Description field located in the Rule section in the New subsection
  17. Check the Force Action box to true/yes for the checkbox located in the Rule section in the New subsection
  18. Enter "DocumentTypeDocument" in the Document Type Name field located in the Rule Attributes section in the New subsection
  19. Click the lookup icon next to the Person file located in the Persons section in the New Person subsection
  20. Click the search button on the Person Lookup
  21. Click return value on the first row of the results set
  22. Select Acknowledge from the Action Request drop down located in the Persons section in the New Person subsection
  23. Enter 1 in the Priority field located in the Persons section in the New Person subsection
  24. Click the Add button located in the Persons section in the New Person subsection
  25. Click the blanket approve button located at the bottom of the screen
  26. Click the Doc Search button in the upper left
  27. Click the Serarch button
  28. Verify the presence of the docID recorded previously on the result page and that the Status if Final

Expected Result: The create Routing Rules document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

SMK46 Test Name: Create Routing Rules Delegation

  1.  

Expected Result: The create Routing Rules Delegation document should fully load and present the route control buttons at the bottom allowing for the document to be completed successfully.

KRMS Tests

Lookups - Basic Edit

SMK47 Agenda Lookup

  1. Login in as Admin
  2. Click on the Main Menu tab at the top
  3. Click the Agenda Lookup link in the KRMS Rules channel under the Lookups heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button

Expected Result: The Agenda maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK48 Context Lookup

  1. Login in as Admin
  2. Click on the Main Menu tab at the top
  3. Click the Context Lookup link in the KRMS Rules channel under the Lookups heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button

Expected Result: The Context maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK49 Term Lookup

  1. Login in as Admin
  2. Click on the Main Menu tab at the top
  3. Click the Term Lookup link in the KRMS Rules channel under the Lookups heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button

Expected Result: The Term maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

SMK50 Term Specification Lookup

  1. Login in as Admin
  2. Click on the Main Menu tab at the top
  3. Click the Term Specification Lookup link in the KRMS Rules channel under the Lookups heading
  4. Click on the Search button
  5. Click Edit on the first results set row
  6. Click the Cancel Button

Expected Result: The Term Specification maintenance document should fully load and present the route control buttons at the bottom allowing for the document to be canceled.

Lookups - Advanced Edit

Lookups - Copy

Lookups - Create New